Skip to main content

Full text of "Motorola V276 Repair Manual"

See other formats


Installing Motorola V276 Small LCD Display Screen 



itixMt 



Installing Motorola V276 Small LCD Display Screen 




step 1 - disassembly Front panel/ Screen 
Logic Board 

• Using the iPod opening tool pry off the top faceplate. 

• Place the tool in the small crack that runs along the 
side of the phone and pry. 



Step 2 



• Using the T6 Torx Screwdriver remove all 4 small 
screws. 



D 2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 1 of 4 



btorola V276 Small LCD Display Screen 




creen 
Step 3 

Remove silver plate from phone. 



D 201 iFixit — CC BY-NC-SA www.iFixit.com 



Page 2 of 4 



Installing Motorola V276 Small LCD Display Screen 




Step 4 

• Using the spudger remove the plastic camera casing 



Steps 

• Using the iPod Opening Tool remove the yellow flex 
cable from the green logic board. 



Step 6 

• Use Spudger or hands to detach flex cable from front 
screen logic board 



D 2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 3 of 4 



Installing Motorola V276 Small LCD Display Screen 




Step 7 - Small LCD Display Screen 

• Using the iPod opening tool, lift the small black flap to 
unlock the screen from the logic board. 



Steps 

• Using your fingers, carefully pull out the small LCD 
display screen. 



Step 9 

• Remove the small LCD display screen completely from 
the green logic board. 



D 2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 4 of 4